5 May
2003
5 May
'03
5:50 a.m.
--- TeoZ <teoz(a)neo.rr.com> wrote:
Anybody have a cheap 390682-01 amiga to vga adapter or
know where I can
get one?
You are referring to the 23-pin-to-HD-15 adapter with the C= logo on it?
I do not know of a source.
I am trying to use a NEC 3DS monitor on my Amiga A1200
to free up my 1084
monitor for my A500 and C128. I tried using a custom cable from IEC but
it doesnt sync all the time (its just a wire thru while the silver amiga
part has a buffer chip inside).
The buffer chip is an inverter chip. I have built these before (with a
home-burned circuit board and everything). You have to invert HSYNC
and VSYNC between the Amiga and some monitors (there were some high-end
monitors that could handle either positive _or_ negative sync signals).
ISTR it's just a 7404 of some flavor in the C= adapter. If you wanted
to get really fancy, you can double-invert the signals, run the buffered
sync signals _and_ the inverted signals through a double-pole-double-
throw switch and make your monitor adapter selectable.
The Amiga video-out connector does provide +5 for powering external
devices (Genlocks, etc.), so that's one item you don't have to worry
about. The pinouts for the 23-pin connector are in every Amiga manual
I've ever owned and I'm sure a Google search will turn them up, too.
-ethan
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com