-------------Original Messages:
Date: Sun, 11 Nov 2007 11:23:30 -0500
From: "Richard A. Cini" <rcini at optonline.net>
Subject: Re: S100 Floppy Controller Question
Good. The Morrow controller then falls into the same category in my mind as
the ComprPro Disk 1 with the added bonus of not requiring mods to my IMSAI.
Now the thousand-dollar question -- does anyone have a suitable disk image I
could use?
On 11/11/07 10:55 AM, "Tim Shoppa" <shoppa_classiccmp at
trailing-edge.com>
wrote:
"Richard A. Cini" <rcini at
optonline.net> wrote:
Oh, I also just found a Morrow DiskJockey 2D/B in
one of my boxes. This
model has only a 50-pin connector and the manual talks about the SA800, so
I'm assuming it's an 8"-only controller.
Well, originally intended for 8" drives, but with a suitable adapter
cable glue and a slightly modified BIOS it'll do 5.25" and 3.5" drives.
Tim.
Rich
----------Reply:
I think Tim's point was that if your controller's smart enough to deal with a
relatively modern 8" drive like a TM848 it could probably deal equally
well with a 5.25" HD drive and you could transparently restore an 8" image
(if you have one) to the 5.25" disk. The controller (and CP/M) would not
even know that it's a 5.25 instead of an 8"; my Cromemcos certainly don't,
although a different FDC might well require some mods to the BIOS.
Worth a try in any case.
m