Tom,
This is the e-mail I got from Bob Armstrong..
Dave
=====================================================================
From: sparetimegizmos at
yahoogroups.com <mailto:sparetimegizmos at yahoogroups.com>
[mailto:sparetimegizmos at
yahoogroups.com]
Sent: 15 July 2015 15:53
To: sparetimegizmos at
yahoogroups.com <mailto:sparetimegizmos at yahoogroups.com>
Subject: RE: [sparetimegizmos] Any builders of the SBC6120 in the UK
The FORTRAN RTS uses interrupts, whereas most OS/8 software does not, and so it reveals
bugs that are not otherwise apparent.
As I recall the problem was with the VGA/PS2 console implementation in the FPGA. Jim
didn?t handle clearing the flags and the interrupt request quite correctly, and it made
FORTRAN hang up in an interrupt loop. It should be easy enough to fix by revising the
VHDL, but I?m not sure Jim ever did. Make sure you have the latest IOB6120 firmware.
FWIW, FORTRAN does work with the SBC6120 onboard serial console enabled so you can use
the IOB so long as you?re not using the VGA console.
This was an issue for many people because it broke the ADVENTure game, which is also
written in FORTRAN :-)
Bob
From: Tom Hunter <ccth6600 at gmail.com>
Sent: 27 November 2020 01:08
To: Dave Wade <dave.g4ugm at gmail.com>
Cc: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Re: DEC PDP-8/E wanted - still looking
Hi Dave,
Could you please explain how exactly the VT emulation "kills" the Fortran run
time system in OS/8?
What is the fault? How do you trigger it? Have you got a Fortran code snippet which
reproduces the problem?
Was there some previous discussion about it answering my questions above?
I have a reasonable level of experience with VHDL and Xilinx ISE so maybe I can fix it if
I can reproduce it.
Thanks and best regards
Tom Hunter
On Thu, Nov 26, 2020 at 6:28 PM <dave.g4ugm at
gmail.com <mailto:dave.g4ugm at
gmail.com> > wrote:
Tom,
If it has an IOB6120 then it the VT emulation kills the Fortran run time system in OS8.
Dave
G4UGM
-----Original Message-----
From: cctalk <cctalk-bounces at
classiccmp.org <mailto:cctalk-bounces at
classiccmp.org> > On Behalf Of Tom Hunter via
cctalk
Sent: 26 November 2020 06:02
To: General Discussion: On-Topic and Off-Topic Posts
<cctalk at
classiccmp.org <mailto:cctalk at classiccmp.org> >
Subject: DEC PDP-8/E wanted - still looking
Tom Uban fully built "Spare Time Gizmos" SBC6120 based computer
complete
with front-panel and IO board is on its way to me. :-)
I am still looking to buy one of the following PDP-8 models:
PDP-8/F
PDP-8/E
PDP-8/L
PDP-8/I
PDP-8/M
Dave, Chris, Paul and Robert I am looking forward to getting more details
from you.
I am happy to pay a reasonable price for the right PDP-8, so a seller won't be
disappointed.
Thanks and best regards
Tom Hunter