2 Sep
2006
2 Sep
'06
10 a.m.
On Saturday 02 September 2006 10:49 am, David Greelish wrote:
Back in the day when I worked on a lot of this stuff, I saw a fair number of
both CP/M boxes and c= stuff, and one time did actually take a few minutes
and boot CP/M on a 128/1571 combo. It ran, and I was able to take some of
the software that I was used to running on other platforms and run it there,
but I was not all that impressed with the way it ran-- it was slow.
People should also be aware of the misleading stuff in the way the speed of
that part is presented. They called it "a 4 MHz Z80" but even though it was
indeed that chip the way they had it configured in there was so tightly
coupled with the rest of the system that it only ran some of the time,
rather than all of the time, giving an effective clock rate of somewhere
around 2.5 MHz.
--
Member of the toughest, meanest, deadliest, most unrelenting -- and
ablest -- form of life in this section of space, a critter that can
be killed but can't be tamed. --Robert A. Heinlein, "The Puppet Masters"
-
Information is more dangerous than cannon to a society ruled by lies. --James
M Dakin
> I also really want to setup an Apple // of some
sort, most likely a //
> gs, but there is the same problem.
Hm, I just happen to have a IIgs system I'm not doing anything with...
I need to find
a really good excuse to set up one or the other, and
so far I haven't found one.
Zane
I agree with this, the C64 or a 64C (I had both) represent the height
of Commodore 8-bit, though I have always wanted a 128D. There are
supposedly "mint" in box examples of these on eBay right now. VIC-20
too. The 128 does have the Z-80 for CP/M though, if that interests you.