Dead CMOS Battery - NEC Powermate portable

Mine just has a small 4.5v lithium. the type that you use on AT's and AT clones of the period with 3 or 4 inch leads and velcros inside. Been in there for about 4 yrs and it works fine, you just have to be careful where you velcro or tie it down to be able to let add-in ISA cards work with it too. My other Powermate portables had this same type battery, wonder is someone didn't make that up themselves or just find a decent substitute. I can't see that it needs a 6v (2x3) cmos source either. => -----Original Message----- => From: owner-classiccmp(a)classiccmp.org => [mailto:owner-classiccmp@classiccmp.org]On Behalf Of Wayne M. Smith => Sent: Saturday, February 09, 2002 8:08 PM => To: classiccmp(a)classiccmp.org => Subject: Dead CMOS Battery - NEC Powermate portable => => => The CMOS battery on my NEC Powermate portable is dead. The => batter is two 3 volt MnO2-Li batteries taped together and attached to a => connector. Anyone know what I can use as a substitute? => => -W => =>