20 Oct
2017
20 Oct
'17
10:43 p.m.
On 10/19/2017 05:00 PM, Jon Elson wrote:
No, it turns out the answer is to set the preamp gain at spec. It
appears to do nothing but create more problems if turned up higher than
that.
It was worth a try.
--Chuck
On 10/19/2017 06:44 PM, Chuck Guzis via cctalk wrote:
My question
for those knowledgeable with this drive is what's the
downside of adjusting the gain to create an output of, say, 7V P-P?
Well, you might have to turn it back down for newly recorded tapes. But,
if you are using it only for recovery of old data, maybe no downside at
all.
But, there are so many defects in old tapes.? There's print-through,
wrinkles from the tape pack scrunching, weave, oxide flaking, dirt
buildup, and maybe some others.