HP9133 user guide...?

I have a 9133H connected to my IPC. I have the 9133H manual and the only reason that I have not bothered to scan it is because it contains no useful info AT ALL! It was written by brain dead people (whenever a manual starts with "Don't let the terminology scare you", you know that the manual is not worth the paper its printed on). Anyway it says zip about the configuration switch other than "it changes disc formatting". Thanks! There are many different models in the 9133 family and they are VERY different between each other. Early ones are amigo, while later ones are CS-80. Anyway the setting that works for me is Configuration switch in position 1, address in position 0. With these settings, I get: /dev/A built-in floppy /dev/D000 9133H hard drive /dev/D001 9133H floppy Connect the external HP-IB hard drive and look in /dev to see the name(s) assigned to the hard drive. Then use the format_disc utility (int he Utilities diskette) to format it. A lot of software for the IPC is available at: http://www.coho.org/~pete/IPC/integral.html There is also an ongoing discussion at http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/forum.cgi?read=70969 Best Regards **vp