2.11 BSD on an 11/93 with an CMD SCSI Module

The saga continues!!! I really don;t remember it being this hard back in the good ole' days but then we had lots of real hardware to work with and systems weren't kludges like what I have in my house. :-) I am currently working with E11 V7.3. My prime interest is in getting a 2.11 system running so I can use tcopy(1) to copy tape images to my one real tape drive. It is SCSI so it is going to be TMSCP on the real system. It is also TMSCP on the E11 system. The problem is I don't seem to be able to do anything on E11 to make 2.11 BSD actually have more than one functional tape. I have tried two TMSCP tapes. I have tried two TMSCP controllers. I have tried one TMSCP tape and various configurations of other tape drives. the result is always the same. I hcae tried building a kernel with all the tapes included. I have tried building kernels with two tapes at a time with different combinations of TMSCP and the others. None of them ever come up with more than one drive. March 26 05:11:44 init: configure system hk ? csr 177440 vector 210 skipped: No autoconfig routines. ht ? csr 172440 vector 224 skipped: No autoconfig routines. ra 0 csr 172150 vector 154 vectorset attached rl ? csr 174400 vector 160 skipped: No autoconfig routines. tm ? csr 172520 vector 224 skipped: No autoconfig routines. tms 0 csr 174500 vector 260 skipped: No CSR. tms 1 csr 164334 vector 774 vectorset attached ts ? csr 172520 vector 224 skipped: No autoconfig routines. xp ? csr 176700 vector 254 skipped: No autoconfig routines. I especially don't understand the "No CSR" for tms Unit 0. If I remove the entry for Unit 1 in the E11.ini file then it recognizes Unit 0. But never both and never any other tape drive. Is there something in 2.11 that I am missing? bill