18 Apr
2001
18 Apr
'01
6:18 a.m.
By the way, if you are going to use RT-11, then V5.03
is the version
that I would strongly recommend as the least version since previous
versions are not able to access the full drive, only the first 32 MBytes.
And prior to V5.0, RT-11 could not even use an RD54. Actually, V5.0
probably can't use an RD54 either since I doubt that it can manage the
RQDX3, but starting with V5.03, RT-11 is OK.
MSCP support was first added in V5.0, so no, the RD54 won't work.
Neither will RX33s, or any of the RD series which needs an RQDX3,
since that wasn't completely supported until V5.2.
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | Internet (work): gentry!zk3.dec.com |
| Unix Support Engineering Group | (home): mbg!world.std.com |
| Compaq Computer Corporation | addresses need '@' in place of '!' |
| 110 Spitbrook Rd. ZK03-2/T43 | URL: http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 | required." - mbg KB1FCA |
+--------------------------------+-------------------------------------+