Jim,
I have had success formatting RD5x harddrives and look-alikes on an
11/23+ using the "M-11 FORMTR RX50" diskette from DEC. It's DEC no.
BL-FN7AP-MC, CZFNAP0. You used to be able to order it from DEC Direct
at 1-800-344-4825 for about $85.
This diskette contains the "latest" diagnostics for disks, diskettes,
tapes, etc. from the Micro PDP-11 Field Service Test Diskettes. You
might have an old set of those diskettes around (they are sometimes
found with the machines) that has recent enough versions for the RQDX3.
Formatting with the RQDX1 and RQDX3 are not compatible. For a good
discussion of many of the questions you ask, see the file
ftp://sunsite.unc.edu/pub/academic/computer-science/history/pdp-11/hardware…
as well as other files in that directory.
Dave
James Willing wrote:
New day, new aggrivations...
I've been trying to get an ST-212 drive formatted up as an RD51 so I can
install a copy of Micro-RSTS onto one of my systems.
Got the parameters to format the drive on my VS2000, and that seemed to go OK.
Put the drive into the system (a MicroPDP 11/23), and it looked OK until I
told the RSTS installer to prepare the drive, at which point it started
complaining about various things, and claimed that the drive was an RD52?!?
Back to the notes... Find a note that drives formatted on a VS2000 are not
compatable with an RQDX1 controller... Whats in the 11/23? Yank the back
off... Figures... An RQDX1! FOO!!
Off to the board box... Locate an RQDX3, looks promising... Install it in
the system... Now the system completes its self test and immediately
complains about a "DU0 - ERR 15 Controller Error". WTH is this? Off to
the book shelf... NUTZ! Latest book I've got only gets up to the RQDX1!
Decide to bag it for the night... Put the RQDX1 back in... Same error???
AARGH!!!
So to the questions:
What is "DU0 - ERR 15 Controller Error" ?
Did the RQDX1 perhaps munge the format on the drive during the install
attempt?
Anyone have a list of the jumpers on the RQDX3 that might be of use ?
Can a RQDX3 be subbed straight across for an RQDX1 ?
If not, does anyone have a formatter disk (or whatever) for the RQDX1 ?
Why am I now getting the same error from the RQDX1 and the RQDX3 ?
Anyone got a spare copy of a manual that covers the various RQDX? ?
Foo!
-jim
---
jimw(a)agora.rdrop.com
The Computer Garage -
http://www.rdrop.com/~jimw
Computer Garage Fax - (503) 646-0174