21 Nov
2014
21 Nov
'14
12:34 a.m.
Yes, the hammer is actually a piece of metal, with a rubber "cup" over it, that
often gets called the hammer. You can remove the rubber part and put some rigid-ish vinyl
tubing over it, but as I have the newly made ones I have not done this.
I will send you the manuals separately.
Regards
Rob
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of drlegendre .
Sent: 21 November 2014 08:05
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: What to look for in a Model 33 Teletype - a newb's buyer's guide?
@Robert
If you - or anyone - have links to digital copies of the Mdl. 33 service /
operator's manuals, please send those my way - would be very much
appreciated!
I presume the rubber hammer isn't so much a /rubber hammer/ as a steel
hammer with a bonded rubber face? Sort of like a pinch roller or drive wheel
from a tape machine or turntable, and so on. Lacking the rubber facing, I could
see how that would damage the 'typewheel' as you say, in short order.
Per your suggestion, the greenkeys list will be one of my next stops. Thank you
for the help!! ;-)
On Fri, Nov 21, 2014 at 1:41 AM, Robert Jarratt <robert.jarratt at ntlworld.com
wrote:
> I suggest you subscribe to the Greenkeys list. I don't know too much
> but a couple of things to know are:
>
> 1. The rubber hammer perishes. Do *not* operate the machine without
> replacing it or you will cause irreversible damage to the typewheel.
> There are two ways to do this. One is to use some PVC tubing, the
> other is to ask on the Greenkeys list as someone has now manufactured
> some completely new rubber hammers.
> 2. Make sure you grease and lubricate it before turning it on. Turn it
> over by hand first. The manuals are available to tell you where to
> lubricate etc. I can supply copies if necessary.
> 3. You will almost certainly need a current loop converter. I was
> lucky to find one on eBay which works like a charm, I think there are
> others. The alternative is to make your own. There are some designs
> knocking around that don't seem too complicated.
>
> There are probably lots of other things, checking for excessive wear
> for example.
>
> I love my Model 33, hearing that sound again is wonderful, it is
> definitely something worth getting and looking after!
>
> Regards
>
> Rob
>
> > -----Original Message-----
> > From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of
> drlegendre .
> > Sent: 21 November 2014 06:53
> > To: General Discussion: On-Topic and Off-Topic Posts
> > Subject: What to look for in a Model 33 Teletype - a newb's buyer's
> guide?
> >
> > I've gone off the Deep End and now I just have to re-have a Teletype
> model 33..
> > I feel awful about what became of the junker I bought for $15 when I
> > was
> a 13
> > year-old and wish I still had it today, so I could fix it and put it
> > to
> use.
> >
> > So what should a mentally-challenged guy like myself be looking for,
> > in
> a Model
> > 33 - preferably an ASR model with the paper tape reader?
> >
> > What does and doesn't go bad? Are there any serious game-changing,
> > show- stopping or buzz-killing issues that effectively render one of
> > these
> units as a
> > parts donor? What differences exist between the various ASR-model
> > units,
> as
> > they progress through the years? What does one look for
> > - and more importantly, what to avoid?
> >
> > And one more - how do you differentiate a 20mA current-loop model
> > from a 'standard' RS-232 model? Can you tell from the rear panel, or
> > do you
> need to
> > go under the hood?
>
>