24 Mar
2012
24 Mar
'12
7:58 a.m.
-----Original Message-----
From: cctalk-bounces at classiccmp.org [mailto:cctalk-
bounces at classiccmp.org] On Behalf Of Roger Ivie
Sent: 24 March 2012 14:47
To: General Discussion: On-Topic Posts Only
Subject: Re: Cable for RX50
On Sat, 24 Mar 2012, Rob Jarratt wrote:
I have a cable with two connectors, one is connected to the other end
straight, and one with a twist. Presumably if I connect to the non-twist
connector that will be OK?
I notice though that the connector is not keyed, any idea which way to
connect it at the RX50 end?
Thanks
Rob
I recently picked up an RX50 for my MicroVAX II. It does not have the
cable with it to connect to the BA123 distribution board, however it
seems to fit a traditional PC floppy disk cable, is that all it needs?
Traditional *PC* floppy cables have the whacky drive select/motor on twist
in them. You need a cable without a twist.
--
roger ivie
rivie at ridgenet.net