22 Feb
2022
22 Feb
'22
7:43 p.m.
On 2/22/2022 6:12 PM, js--- via cctalk wrote:
On 2/22/2022 7:00 PM, Ray Jewhurst wrote:
Writing a 360KB or RX50 diskette with a 1.2MB drive is a path to a lot
of frustration. Not only do you have to double step the drive (software
often takes care of that part), but the tracks written will be narrower
than a real RX50 / 306KB drive, providing a smaller signal/noise ratio.
And, if you don't start with completely magnetically erased media, any
left over junk in any data left over may be picked up by the RX50 head.
Been there, done that.
JRJ
I read that you can indeed use a standard 1.2 Meg
drive and that you
can also use DSHD 5.25 disks in place of RX50s. Is there any truth in
this? If there is it will be much easier and cheaper to make disks for
my Rainbow.
As Chuck noted, I'd think you'd want to use 360K media -- not DSHD
diskettes... and ensure that the 1.2MB drive is slowing down to 300RPM
with a data rate of 250KHZ.
These features will depend on the 1.2MB drive you have, as well as your
FDC and imaging software.
- John Singleton