27 Oct
2002
27 Oct
'02
5:29 a.m.
Well I plugged in the KZQSA into the Qbus, did a show qbus and didn't see
it, tried to run config and put in kzqsa, kfqsa-disk and tape, got their
address/vectors:
772150/154 kfqsa-disk
774500/260 kfqsa-tape
761300/300 kzqsa
Did a Show qbus again, but it starts at 761500 so I can't find the location
associate with it to do a set ho/ma/uq on the uqssp Controller.... arrghhhh!
Anyone know what the jumper settings are on these cards, maybe something
needs to be changed.
Curt
----- Original Message -----
From: "Fred N. van Kempen" <Fred.van.Kempen(a)microwalt.nl>
To: <cctalk(a)classiccmp.org>
Sent: Sunday, October 27, 2002 11:05 AM
Subject: RE: Need help with DSSI/SCSI and an ext CD-ROM
I wrote:
The SCSI connector, however, is NOT usable for
what you're doing.
The BA440 box (which is what your cab sounds like) has provisions
for changing its internal (DSSI) bus into a SCSI bus, for example
to be used with the KFQSA controller. That way, you can use SCSI
devices with the VAX by mounting them in the old DSSI rails.
The VAX does _NOT_ have a SCSI controller by default; unless you
have something like a KFQSA, Dilog or Emulex SCSI-to-Qbus controller,
you can NOT use the RRD43.
Make that an KZQSA, obviously...
Does anyone have a KFQSA and/or KZQSA they'd be willing to let go
for a fair price?
Thanks,
Fred