Help setting up a SBS/Bit3 PCI-to-VMEBus cards

Hi Chris, I was able to get the drivers from SBS. They have the manuals, etc online and anyone can download them. Better than other companies where it is a pain to get them. Since I am quite a newbie when it comes to VME, I am not sure if I installed everything correctly. I got the chassis hooked up and everything and the showrevs utility does seem to pick up both the PCI and VMEBus cards. I really want to get this working under Linux, but I want the windows version up and running first. Here is what I have so far: 1) A VME Chassis with the SBS board connected to slot #0 (System controller) 2) Several transputer VME slave boards on the other slots. I want just the 1st transputer board to be recognized by the VME bus while the others are there just for power and J2 connections. 3) The drivers I have for the transputer boards are UNIX source files which I need to convert over to Windows XP/SBS style. I could surely use some help here (any software that illustrates how to communicate when be helpful). 4) There seems to be terminators? on both the J1 and J2 on slot #0. What are they used for? Should I remove them? They are on the back of the VME Chassis. 5) This is a VERO chassis (if that has any relevance). Thanks a lot, Ram