27 Nov
2014
27 Nov
'14
12:53 a.m.
Hey guys,I've been working on trying to get an internet based BBS setup on my apple
IIe.I have GBBSPro 1.3 running on the IIe using a super serial card in slot 2, switched to
run at 2400BPS. I have the modem set to external, and the modem type is "Hayes
Smartmodem 2400".I am using a straight through 25M-25F between the MSS100 and the
super serial card. The ssc selector block is pointing to "terminal". There is
no null modem in the setup.The MSS100 is accepting remote connections, and the serial port
is also at 2400BPS N81. The settings for Access: remote, DSR logout, DTR wait, and Modem
Emulation are checked. I have tried all flow control options and none.When I telnet to
the remote access port (2001 or 3001) it connects but immediately disconnects. Once in a
while I see an modem initialization string on the terminal before it closes. The string
is "ATX3S0=1&C1&D2S2=128". I understand what the init string does, but
I'm not sure if its coming from the MSS100 or from the BBS. During this period, the
bbs is just sitting at the "waiting for call" screen.If I turn off DSR logout, I
do not get disconnected, but I'm not connected to the bbs.Anyone have any experience
with this? Are there any settings that must be changed?Thanks in advance,Kevin? 2014
MicrosoftTermsPrivacy & cookiesDevelopersEnglish (United States)