Disabling SCSI parity checking to dump disk on ACB4000 MFM-SCSI adapter?

On 9/23/20 8:54 PM, Grant Taylor via cctech wrote: Not really, unfortunately. The error messages are a bit cryptic: [ 1069.277571] (scsi8:A:0:0): Sending SDTR period 45, offset 0 [ 1069.278961] scsi 8:0:0:0: Attempting to queue a TARGET RESET message [ 1069.278964] CDB: 0x12 0x0 0x0 0x0 0x24 0x0 [ 1069.278975] scsi 8:0:0:0: Command not found [ 1069.278979] aic7xxx_dev_reset returns 0x2002 [ 1069.279286] (scsi8:A:0:0): Sending SDTR period 45, offset 0 [ 1069.280736] scsi8: Slave Alloc 1 [ 1069.543400] scsi target8:0:1: asynchronous [ 1069.543416] scsi8: target 1 using asynchronous transfers [ 1069.543420] scsi8: Selection Timeout on A:1. 0 SCBs aborted It seems that the problem lies in the firmware of the ACB4000, which doesn?t seem to support some standard commands, e.g. the INQUIRY command. Most recent Linux SCSI drivers seem to use this command. Some information on this problem can be found here: https://www.zot.org/~hamish/hacks/acb-4000.html There?s a thread (in German, sorry) in which someone tried to get a disk on an ACB4000 to work: https://de.comp.os.unix.linux.misc.narkive.com/ti21cHO0/scsi-1-platte-unter… and somebody else (also in German...) claims that he could run a disk on an ACB4000 (from an Atari SH204) on an Adaptec 1542: https://forum.classic-computing.de/forum/index.php?thread/18576-wie-program… So maybe an Atari ST with an ACSI->SCSI adapter might help. That seems to be one of the machines we don?t have here... -- Michael