DEC MINC-11 question

Thanks, seems like when I turned the intensity up on the CIT-101 video terminal the error was "checksum error NVR 00" and the error was there, even with the MINC-23 off. NVRAM in the terminal must be bad. I replaced the C.ITOH model CIT-101 video terminal with a DIGITAL VT-102, I get the flashing cursor in the upper left hand corner of the VT-102 with no errors in NVRAM , but the terminal does not talk to the MINC-23. I am not familiar with how the MINC communicates to the terminal. I have baud rate on VT-102 set at 9600 for both RX and TX. I do not see even an echo on my keystrokes on the VT-102. I have no docs on the terminal or the MINC. Can I use a PC running hyperterm or procomm to talk with the MINC? The M8012 boot card has 5 LEDs, red,green,red,red,red and all of them are continuously illuminated. What are the functions assigned for these LEDs? Hutch ard(a)p850ug1.demon. co.uk (Tony Duell) To: cctalk(a)classiccmp.org Sent by: cc: cctech-bounces@cla Subject: Re: DEC MINC-11 question ssiccmp.org 01/16/2004 06:26 PM Please respond to "General Discussion: On-Topic Posts Only" The field upgrade from MINC-11 to MINC-23 was basically just swapping the CPU card. Sounds like somebody (not DEC failed circus?) did this and didn't change the nameplate. That doesn't sound like a DEC bootstrap message. Are you sure it's coming -tony