6 Apr
2013
6 Apr
'13
4:50 p.m.
On Apr 6, 2013 4:03 PM, "Mr Ian Primus" <ian_primus at yahoo.com> wrote:
Regenerate the system with 4 supported RL units instead of the default of
2. See the System Generation Guide.
-Glen
I've been doing a bit with an 11/23+ setup and a few RL drives, and I've
run into something odd. I currently have select plugs 0, 1 and 3. If I plug
in two drives, 0 and 1, I can boot from either one, and once in RT11, I can
access the other one. Easy. If I connect two drives, 0 and 3, however - I
can only use drive 0. All accesses to drive 3 result in an error. Can't
boot from it, can't access it from RT11. Thinking that maybe the plugs had
to be in order, I connected only one drive, drive 1, and was able to boot
it and use it just fine. Then, swapping the 3 plug into that single drive,
can't boot from it.