27 Mar
2001
27 Mar
'01
4:39 a.m.
On Mar 27, 7:23, Cameron Kaiser wrote:
I have a little Allied Telesyn transceiver I'm
using on the Solbourne.
Nice gadget, fits in the palm of my thin piano-playing mitts. There's a
DIP
on the side for SQE-Enable and four status lights.
Works very well.
I have several AT 10bse2 and 10baseT transceivers like that, and a few
Eagle ones and a D-link one too. Also a little DEC one that's about twice
that size (lengthways). Lots of companies made very small
"microtransceivers", some of them with several LEDs (my Eagle 10baseT ones
have 6).
They're quite handy for checking links through patch panels and structured
wiring - wire a PP3 (MN1604/6LR6 9V) battery to pins 6 (-ve) and 13 (=ve)
and you can test for a link light and even see when there's traffic. The
poor man's Cat5 cable tester.
That reminds me, since I'm an AUI novice. I picked
up a DB15 straight
through cable at Fry's (it was sold as a joystick extension but it works
fine on the Apple monitors too). I also have an Allied Telesyn hub that
accepts eight 10BT connectors, Thinnet, and one AUI. If I plug the
Solbourne
right into the AUI port on the hub, will I need the
transceiver anymore?
That won't work, I expect. The Solbourne connector is supposed to plug
into a transceiver, and so probably is the one on the hub. I bet they're
both sockets? If so, I suggest you don't try it, as those connectors
provide power to the transceiver, apart from needing a crossover (and the
collision detect would go haywire too).
--
Pete Peter Turnbull
Network Manager
Dept. of Computer Science
University of York