12 May
2002
12 May
'02
8:54 a.m.
"Jerome H. Fine" wrote:
If you should happen to have a 6 button front panel
(probably rare),
then you can use two RD5n drives.
I have done this with a 4 button panel and RQDX3. I attached two RD32's and ran
2.11BSD until one of the drives when flakey. It took a jumper or a pullup
resistor on the panel board to simulate the online and write protect buttons for
drive 1. If anyone wants the jumper description, let me know and I will pull out
the board and take a look.
Jerome Fine
-chuck