14 Aug
1998
14 Aug
'98
11:44 p.m.
On Sat, 15 Aug 1998, Doug Spence wrote:
IIRC, it was more like 140 seconds. :/ That's for
cold start, when it
goes into blinking mode after a command is issued to it, I think the
blinking time is shorter.
On powering up the ProFile disk:
"The red ready light on the ProFile's front panel will come on for about 2
seconds, go off for about 20 seconds, and then start to flash for about 40
seconds while the drive runs internal tests. When the tests are
successfully completed, the light will remain on continuously without
flashing. Under some conditions the ProFile may take up to 3 minutes to
complete the startup sequence."
ok
r.