31 Dec
2002
31 Dec
'02
1:14 a.m.
On Tue, Dec 31, 2002 at 06:59:00AM -0600, Bradley Slavik wrote:
Your VT420 has only MMJ ports? See
the other post or google for MMJ and
pinout or http://www.bsdfans.org/ (?) to get the pinout. You can use
any 6 pin RJ cable for the MMJ port if you cut off the tab.
Hmm. Can't remember exactely. The 300 does not have direct
connectors
for keyboard and mouse? There is a DB15 for keyboard and mouse? Then
you need a DB15 to 7 pin miniDIN (mouse) and 4 pin RJ (keyboard)
breake out cable. AFAIK it is the same as on DECstations, but _not_
as on VAXstations.
Any regular
"null-modem" cable should do the job.
I see how to hook up vt220 with
db25 f-f null modem cable, but how does that
get vt420 hooked up? It appears to have some kind of RJ connecton in back,
not DB style. Is there a special cable for that? You need a
LK201 or LK401 keyboard and a VSxxx mouse. The same keyboard
(and mouse) as used on the VT[234]xx terminals and the VAXstations.
Where do they
hook up to? I see on ebay cables with db15 end and 3 bnc,
keyboard and mouse at the other end.
This cable is for early VAXstations, it will
not work.
You need a separate video cable.
I have plenty of monitors, but not quite sure what you
are saying. Say I
have monitor with 13w3 connector on back, then I need 3w3 to 13w3 cable and
monitor is set?
You need a 3W3 video cable, preferable to 3 x BNC. Then you can
use
a 3 x BNC to 13W3 cable and BNC-BNC adapters (if you can't get this
adapters BNC T plugs from your 10BaseT cabling will do too) to connect
the two cables together, resulting in a 3W3 - 13W3 cable.
If the monitor works with the DEC, just try. Most newer 19"/20" tubes
should do.
Where do keyboard and mouse come into picture? Special
cable
plugging into tablet port (DB15) in back of DEC 3000?
Yes, see above. (The
"tablet" is a keyboard. ;-) )
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/