24 Nov
2008
24 Nov
'08
3:49 p.m.
--- On Mon, 11/24/08, Chuck Guzis <cclist at sydex.com> wrote:
I wonder if the coating could be made from a slow-ish
drying binder,
such as polyurethane resin, mixed with the oxide, the drum
liberally
coated with the glop and then spun at low speed
(horizontally) while
drying to keep the coating a more-or-less uniform
thickness.
Interesting. He might have to experiment w/speeds so that all the material isn't
pulled to the outer edge. But regardless even if you determined the right speed, you might
have a globule of the crap LOL accumulating near the perimeter.
I don't know if it would work, but it might be
worth
looking into.
Cheers,
Chuck