Hi anyone can ID this card?
Was pulled from a XT pc machine.
Ok,
The FPU # is: FPU P/N 33F4846
other label: P/N 57F1590 A26 6290
other small lonely label: A40167
The big PGA ceramic with gold square cover printed on:
L1A0511
6298386
IBM CORP. 84
CAC 8452
Only 40 pin IC is TI:
TMS32010NL
there more info on it but not needed to list:
At end of the card where it is against the front end chassis has 8 24
pin DIP ceramic made by toshiba says: TMM2018D-55
There is other 2 chips same but it's rated -45. I know they're
memory type but what is it?
Half of the chips on it is mostly analog types and much number of
capacitors and SIP resistors and two transformers, 3 relays; 2 are
single pole and one is double pole type.
Ok looking at bracket from back as normally installed into PC:
Starting from top:
First 2 connectors are RJ45 type with 8 contacts. Bottom one is
different from that 2 it's 6 contact type with 2 in centre replaced
by a nub otherwise it's equivlent to RJ45 type but needs a special
connector that fits this type of connector with this little nub.
Ok, there are empty small holes behind them there are 2 groups of 3
solder holes. I do not know what it would be used.
That is sure sign of some kind of jack plugs.
This card is in fine condition.
Thanks!
Jason D.