VAXstation 3200

The VS3200 was the MicroVAX III with a GPX frame buffer card set. They are either 4 bits or 8 bit planes (1 or 2 bitplane cards) The typical loadout would be : KA650 M7620 (sometimes upgraded to KA655 M7625) MS650 M7622(16M) or M7621(8M) (one or two for 16MB or 32MB) VCB02 M7168 (control) M7169 (4 bitplanes, with two its 8 bitplanes) DELQA M7516 Ethernet M7546/M7559 TQK50/TQK70 tape controller M7555 RQX3 disk controller 1 x RD54 in the "small version" 2 x RD54 in the "large" version A lot of people would replace the disk controller with a third party ESDI or SCSI controller. Connections on the back: AUI ethernet DE9 Console (with panel switches) DB15 monitor/keyboard/mouse cable If you got one or both in the BA123 config (large version) then that's about it, if they are in BA23s (rack mount x 2 or pedestal mount x 1) then you probably have a smaller config. Depending on processor (KA655 or KA650) its 2.8 or 2.4 VUPS) not a bad VMS box and runs NetBSD (although without Framebuffer support yet.) --Chuck At 06:20 PM 3/18/01 -0500, you wrote: