VAX 11/780s - Masscomp - Valid equipment available

Hello all, Along with the Astronautics ZS-1 machines I posted about earlier, we have some other equipment available. I have someone interested in one of the 11/780 machines and possible others. As with the ZS-1 machines, the time frame isn't very long. Again, we are closing this facility and the equipment will be scrapped if not rescued. 1 DEC 11/780 (3 wide cabinet) currently up and running 4.2 BSD 3rd cabinet has a Ven-tel plugin modem rack w/~10 modems 1 rack containing 4 Fujitsu Eagle drives (one drive is off-line due to increasing errors) 1 Fujitsu 9-track tape drive in 2 wide cabinet (not quite as tall as the VAX cabinet)(This is a nice auto loading drive, there is a second one available with two drives from a non-VAXyb system) 1 DEC TE16 9-track tape drive (1 wide cabinet) 1 Fujitsu line printer 1 DECWRITER III printing terminal as console 1 DEC 11/780 (3 wide cabinet) currently down but was running fine when turned off (VMS) 3 DEC RP07 drives (each the size of a washing machine on steroids!) 1 DEC TU78 9-track tape drive 1 Scicards design station (This is a dedicated color graphics terminal used for printed circuit board (PCB) layout) I am told the tube was a little on the fuzzy side. 1 Benson photo plotter (we used this exclusively to print out PCB artwork for checking) 1 Dataproducts line printer 1 DECWRITER III printing terminal as console 3 Valid Systems m68k based Multibus systems. Each system has several dedicated mono graphics cards to drive multiple design stations. Each system is in a half-height rack which contains the Multibus rack, an 8" Fujitsu fixed disk drive and the slot loading 9-track tape drive. I am unsure of the status of these systems. I believe they were running when shut down, but I have doubts about the drives. 6 or more of the Valid Scaldstation design stations. Each includes a table with built-in digitizer and a 19" green monochrome graphics monitor. These systems were used primarily for schematic capture, but ran a full blown UNIX, so I always enjoyed reading news on the "big screen". :) 1 Masscomp m68k based system This system is also Multibus based and resides in a pair of 5' high racks. One rack contains the multibus chassis and a pair of Fujitsu drives. The second rack houses the 9-track tape drive and a third 8" Fujitsu drive. This machine was only lightly used when I signed on in 1989, and shut down shortly thereafter. I have gotten it up and running RTU on its ST-506 boot drive, but haven't managed to get the Fujitsus online. 7 Masscomp MC-500 deskside chassis These are also Multibus based m68k systems. These run the same OS as systems above. They have an internal 5-1/4" floppy and ST-506 fixed drive. There are a bunch of the monochrome graphics tubes that go along with these units. Actually, it appears like each chassis is designed to drive a pair of the graphics terminals. I have one of these boxes that I did a clean install of the RTU OS. The other 6 are in varying states of repair. I think there are enough bits to assemble at least 3 more complete systems. 2 DEC MicroVax II in a 19" There is also a rack mounted chassis with a pair of SMD drives. Each of the MVII has a SMD controller card. Both of the boot drives are dead and I don't have a way to format replacements. I would like to hang on to these if I can manage to get them home without doing myself harm. 1 Tek 4014-1 graphics terminal w/hard copy unit. The terminal works fine, but I haven't had a chance to test the hard copy unit. I would like to hang on to this unit, but moving it is definately a two person and a truck kind of thing. So I may have to let it go. :( ? StorageTek 9-Track drives. 110V operation. How many of these I have depends on the fate of the ZS-1 machines. I have a couple now, and will have several more if the ZS machines are scrapped. Large quantities of documentation. Over a dozen UNIX programmers manuals in metal desktop racks. Complete documentation sets for VMS, gray and orange binders. I have a box with complete unopened docs for a later version (don't remember off-hand which version) of VMS than we had ever installed. Documentation for several revisions of SunOS4. If I were to walk through the building, I could easily double this list. Basically we have just about everything! Thanks for listening, Jon Jon Auringer auringer(a)tds.net