7 Jun
2003
7 Jun
'03
3:44 a.m.
I have two Teletypes that had the same problem. What I did was remove
all the gunk from the print head and the hammer with Goof-off and an old
toothbrush, and then I took a regular new pencil and cut off the eraser
with an Exacto knife. Then I took a drop of super glue, and stuck it in
place on the hammer. After trimming a little, ta-da! Mine has been
working just fine now for close to two years. I'm sure that this is not
as nice as having the correct part, but who has the correct part?
Probably a better solution would be to find some soft flexible rubber,
but I didn't have any at the time, and the eraser works great so stopped
looking!
-Bryan
Tore Sinding Bekkedal wrote:
I have recently bought colour tape for the 33.
The printer has a black substance that pushes the printhead towards the
paper. This has dissolved into an oily-like thing, and there is zero
pressure for the head against the paper. I will try to put a licorice
candy (L?kerol) in its place as a kludge, but it very likely won't last.
Do you know what causes it? Where to get a new one? Is that SUPPOSED to
happen?'
Confused Regards
-Tore