31 Dec
2018
31 Dec
'18
8:43 p.m.
From: Paul Koning
> On Dec 31, 2018, at 6:32 PM, Henk Gooijen via
cctalk <cctalk at classiccmp.org> wrote:
> ...
> There are one or two bits in a register of the RK11 that have a
> different meaning/function, depending on the controller being a -C or
> -D.
If someone can point me to the description of the
differences I should
be able to say what RSTS will do with them.
AFAIK, the only difference (in programming terms) between the -C and -D is
that the -D has dropped the maintainance register.
Although I cheerfully admit I haven't sat down with -C and -D manuals and
done a bit-by-bit compare. I just did that (I used the "RK11-C Moving Head
Disk Drive Controller Manual", DEC-11-HRKA-D, and the 1976 "Peripherals
Handbook"), and found in the following:
In the RKDS: bit 7 has changed the definition slightly ("Drive Ready" to
"R/W/S Ready"), but seems to be basically the same. In the RKCS, bit 9 is
"Read/Write All" in the -C, and unused in the -D; bit 12 is "Maint" in
the
-C, unused in the -D.
In other words, a -D driver should work just fine with a -C, IMO.
Noel