Betr.: Morely Electronics Teletext Adapter.

The users guide can be downloaded here: http://www.retrocomputing-world.com/biblio/computer/acorn/doc/MorleyTeletex… Furthermore you could check http://www.8bs.com/ and The BBC lives (http://www.bbc.nvg.org/ ). The latter should have an archive of ROMs, which almost certainly should have the ROM for your adapter. Cheers, Eelco While looking for Econet bits, I found the above-mentioned unit (Morely Electronics Teletext Adapter). It's clearly a BBC periperal. On the back is Belling-Lee coaxial socket (standard TV aerial connector), and a piece of 6 way ribbon cable. This splits, 4 wires go to a 20 pin 2-row IDC header socket (presumably BBC User Port, the connections would then be +5V, Ground, and 2 lines for I2C SCL and SDA). The other 2 wires go to a plug to fit the BBC's power outlet socket, to get 12V. Inside there's a single PCB with a TV tuner module mounted off one edge. The PCB contains a TV IF strip, CITAC (Computer Interface for Tuning And Control) chip (to select the TV channel under computer control), and a standard Teletext chipset (SAA5240 based IIRC). Does anyone know anything about this unit, and more importantly, anyone know where I can get the software to use it (it's certainly not compatable with the Acorn Teletext unit). -tony