Vaxstation 4000 m60 and NetBSD

On Tue, 19 Dec 2017, Charles Dickman via cctalk wrote: The RAMDAC is standard, so as long as frame buffer memory is mapped into the CDAL address space writing a dumb device driver should be pretty straightforward with little reverse engineering effort. And CDAL address decoding is I believe documented in the KA46 board specification. And all else failing you can always resort to TURBOchannel graphics wired via a TURBOchannel adapter. While not supported by the console monitor, it can be handled by the OS just fine, and several TURBOchannel graphics drivers are already available for other ports, so it's just a matter of a suitable kernel configuration (with minor patching possibly, depending on how cleanly written the respective drivers are). I was able to get OS console output using at least the HX and one of the HX+ options with my m90 and the (still very crippled and long neglected) VAX/Linux port several years ago. The MX, CX and TX options should be easily supportable too. Only accelerators (PixelStamp and PixelVision architecture implementations) might cause trouble for one reason or another (such as using DMA or requiring a TURBOchannel extender, which are scarcer than hen's teeth). FWIW, Maciej