parts needed

Have you tried DigiKey. I haven't looked through my catalog as it's buried in a box right now but they sshould have many of these parts. MCM Electronics in Ohio also has many items and even if not in their catalog they can outsorce them many times. -----Original Message----- From: owner-classiccmp(a)classiccmp.org [mailto:owner-classiccmp@classiccmp.org]On Behalf Of Cini, Richard Sent: Monday, February 12, 2001 3:15 PM To: 'ClassCompList' Subject: OT: parts needed Hello, all: Well, I'm going to embark on another project--to build the P112 Z80182 SBC. As you may recall, this is a nifty Z80-based SBC that's the size of a 3.5" floppy drive and uses a standard PC I/O controller for disk support. Dave Brooks no longer makes the machines, but I was able to purchase a bare board from him for $25. Anyway, it requires a few SMD components which I can locate at Arrow and Pioneer Standard, but there are purchase minimums that I can't meet. I can probably order the chips in one-offs but not the SMDs. So, I'm looking for the following: BAR43C Schottky diode SOT23, common cathode ; has odd pin configuration BAR43 {same} BCW71 transistor, NPN SOT23 SMSC FDC37C665GT SuperIO chip, QFP100 Zilog Z8018216FSC1932 Microprocessor, QFP100 Anyway, if anyone has a source for these in hobbiest contact me off-list. Thanks. Rich ========================== Richard A. Cini, Jr. Congress Financial Corporation 1133 Avenue of the Americas 30th Floor New York, NY 10036 (212) 545-4402 (212) 840-6259 (facsimile)