2 May
2006
2 May
'06
12:35 p.m.
On Tue, 2 May 2006, dwight elvey wrote:
OK and I can use the 360K disk fine but I can't
use the\
1.44M while the 360K is connected. If I remove the
26 pin connector, the 1.44 works fine.
^^ ????? Do you mean 34?
What signal is most likely the problem from the old
360K that is stepping on the 1.44M?
straight or twisted cable? termination?
I'm using this setup to transfer images for my
Olivetti
M20 so it is somewhat on topic.