IRIS Power Series power supply questions

Hi everybody, In preparation for my eventual booting of the IRIS Power Series machine, I pulled the back off yesterday and inspected the power supply, etc. It appears that somebody disconnected several plugs and some screw-posts when they pulled the unit out of service (!)... Anyway, to make a long story short, I had to make several assumptions in order to get the thing back together. Here they are, and can anyone confirm or deny them? The square-ish plugs should all be plugged in to the plug they match. (I thought this one was pretty safe.) The three loose post-screws go to the three wires that were just floating around loose (coming directly (more or less) out of the twist-lok plug. These screws are labeled N~, L~, and <earth symbol> The Earth pin on the twist-lok plug is the longer one. (made sense to me, but I can't find anything to confirm it...) The L~ probably stands "Live" or something like that (?) The N~ probably means "Negative" The positive lead on the twist-lok plug is the one that has the breaker on it. Given that logic: The L~, being positive, should be attached to the wire with the breaker in it. The wire connected to the long pin on the plug should be connected to the <earth symbol> connector. The other wire should be connected to the only loose-screw left. There is further evidence in the way the wires were bent, which suggests that this is all correct. Has anyone see these things before, and can possibly confirm this? Chris Christopher Smith, Perl Developer Amdocs - Champaign, IL /usr/bin/perl -e ' print((~"\x95\xc4\xe3"^"Just Another Perl Hacker.")."\x08!\n"); '