I have quite few NSFnet backup tapes that need to go to Al at some
point. They likely have good stuff on them.
--
Will
On Sat, Nov 3, 2018 at 5:03 AM Kevin Bowling <kevin.bowling at kev009.com> wrote:
Do you have software or docs for any of this stuff? I run
ps-2.kev009.com
On Thu, Nov 1, 2018 at 3:41 PM William Donzelli via cctalk <cctalk at
classiccmp.org> wrote:
>
> OK, I assumed the 6611s used the NSFnet type cards. Artic960s are
> different animals - but probably very similar in idea.
>
> My memory is hazy, but I think the NSFnet cards were referred to as Hawthornes.
>
> Somewhere around here I have one of the really early 386 based routing
> cards - a weird double height Microchannel card (the RS/6000s were
> RPQ'd with extra tall chassis to accommodate them).
>
> Anyway, I would like to get a 6611, but I do not think very many were
> made at all.
>
> --
> Will
> On Thu, Nov 1, 2018 at 6:19 PM Paul Berger via cctalk
> <cctalk at classiccmp.org> wrote:
> >
> > The machine type was 6611 and there where three model, the smallest was
> > based on a 7011 the mid size one was based on a 7012 and the largest was
> > based on a 7013.
> >
> > The base card is an Artic 960 card which is just a processor card with
> > some memory that gets an application loaded on the fly. The top
> > interface card has a lot to do with determining what the function of the
> > card sandwich is, there should be a X-Y type code on the back of the
> > card that would define the interface. They where used for all kinds of
> > things like Synchronous communications, X25 and network accelerators.
> > Some of the interfaces cards used in the 6611 where unique to it and
> > never made it to the "standard" RS/6000 line. There was also a PCI
> > version of the Artic 960 but by the time it came along the 6611 was long
> > gone.
> >
> > Paul.
> >
> >
> > On 2018-11-01 1:15 PM, William Donzelli via cctalk wrote:
> > >> So, what is this i960-based card for?
> > > They were the routers. At the core nodes of the network, there would
> > > be a big RS/6000s (very early POWER1 types) that would each do about
> > > 4-5 high speed interfaces (FDDI, HSSI, and 10base2). Each interface
> > > was one of these cards, so each of the big RS/6000s would have about
> > > 4-5 of these cards.
> > >
> > > IBM tried to commercialize the design, but it was doomed - the routing
> > > engines were very fast, but the internet quickly outgrew the
> > > architecture of the engines, and they apparently needed a complete
> > > redesign to compete. IBM did release very few of these RS/6000s to the
> > > public (I think RS/6000-320Hs with a fancy tag - machine type 6767?).
> > > I have only seen one of these routers in the wild, but most of the
> > > real NSFnet ones (I was decommissioning them, one time with a Sawzall
> > > because of some live tangled cables).
> > >
> > >> Could it be related to what you
> > >> say in your post?
> > >>
> > >>
https://imgur.com/NIvQPBv
> > > Possibly related, but that card is not one of the NSFnet ones.
> > >
> > > --
> > > Will
> >