21 Feb
2015
21 Feb
'15
3:56 a.m.
Mystery have solved!
I traced down receive & transmit pins from RJ45 and scoped little bit. I found one pin
bursting 9600baud data couple seconds intervals and I connected this to terminal.
Here's result at start up:
https://drive.google.com/file/d/0B_DR111cK6W-LTZqeWt2QzlRRU0/view?usp=shari…
*************************************************'
SCSI INTERFACE FOR HP-1000. GRUMMAN 1995.
Module: START; Version: 5.60
Test Group 1: EPROM CHECKSUM TEST - PASSED
Test Group 2: GLUE LOGIC TEST - Test #5 - PASSED
Test Group 3: RAM ADDRESSING TEST - Test #5 - PASSED
Test Group 4: SCSI CONTROLLER TEST - Test #8 - PASSED
Test Group 5: RAM DATA RETENTION TEST - Test #2 - PASSED
Test Group 6: WINCHESTER (FIXED) DISK TEST
Device init routine - ** FAILED **
NCR register: 21 Expected data: 01 Actual data: 00
*************************************************************
So Grumman made this board. Chip dates was right, very late design for this old computer.
Pretty cool!
****************************************************
Thanks for tips! I have lost couple hours those sites before. I probably make some own
high speed downloader boot ROM / hardware / PC soft just for fun, but I have to test those
too.
This is topic of its own, but do anyone know any 21MX assembler and microassembler for
DOS/Windows? Or have I make one..? I have little (demoscene) project going on for this
21MX. Same project includes IBM 1800, hopefully... Later more this totally insane project,
but I guarantee no old computer is harmed on that performance ;D
Thank you all!
- Johannes ThelenFinland
Before microcomputers blog (Finnish) http://ennenmikrotietokoneita.blogspot.fi/
If you did
find one of those then you could use the HPDrive software
on a PC with a GPIB interface to emulate a CS/80 drive.
http://www.hp9845.net/9845/projects/hpdrive/
> That is CS/80, not C580. You would need to find an 12821A HP-IB>>Interface to
use that.>>http://www.hpmuseum.net/display_item.php?hw=486>>If you did find
one of those then you could use the HPDrive software>>on a PC with a GPIB interface
to emulate a CS/80 drive.>>http://www.hp9845.net/9845/projects/hpdrive/ From: jdbryan at acm.org
To: cctech at classiccmp.org
Date: Fri, 20 Feb 2015 13:25:53 -0500
Subject: Re: HP 21MX Ethernet/SCSI card?
On Friday, February 20, 2015 at 9:09, Glen Slick wrote:
If you did find one of those then you could use
the HPDrive software
on a PC with a GPIB interface to emulate a CS/80 drive.
http://www.hp9845.net/9845/projects/hpdrive/
Johannes: you could also use HPDrive to emulate a 7970 9-track tape drive
or 9144A cartridge tape drive, so you wouldn't need to write your own
emulator. Your CS/80 boot ROM should be able to read the first block of
the 9144A tape image into memory, although the code read in must be
arranged in a certain way. Let me know if you want the details.
-- Dave