General Electric Terminet HP 2762A

Von: Henk Gooijen <henk.gooijen at hotmail.com> An: jwsmail at jwsss.com; General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org> CC: Gesendet: 17:42 Donnerstag, 30.April 2015 Betreff: Re: General Electric Terminet HP 2762A -----Oorspronkelijk bericht----- From: jwsmobile Sent: Thursday, April 30, 2015 12:29 PM To: Discussion at classiccmp.org:On-Topic and Off-Topic Posts Subject: General Electric Terminet HP 2762A I recently acquired a GE Terminet 300 in the guise of an HP 2762A terminal, KSR. I am attaching what I have so far in my blog. I've found little on the technical side for this terminal. If anyone has a manual I'd appreciate a copy. It is referenced in one listing of HP manuals, 02762-90001 the service manual. I'm not sure what to make of the one hit I get on that P/N that isn't bitsavers mirrors. I figured I'd ask here first. I'll also ask on the hp equipment group, I am on there too. hpmuseum.net is welcome to my photos, or contact me offline, and I'll make some better quality shots for your web site. I plan to get this going to use for the Multics Simulator at some point. The TN300 was a common console, and was an early symptom of the featureless, non-blink'n lites type shop that came to be. I know the Honeywell 6180 that ran Multics had an 8 panel service panel with wonderful sets of lights, but it was hidden in a cabinet, and typically not accessed by the operator. thanks Jim http://jimsoldtoys.blogspot.com/2015/04/2762a-terminal-printer-ge-terminet-… --- Good luck with your search Jim. I posted a request for *any* doc of the TermiNet 340 a month ago ... Not a single reply :-< And my searches did not produce anything either. And I'd love to get that line printer up and running on an 11. greetz, - Henk