WTB: Emulex MT-02 controller

Most of them certainly do. QIC02 to the host and QIC36 to the drive. I have (and still use) an old Archive Sidewinder drive. It's old enough that it's 8" form factor, and needs +5V and +24V. On the metal frame is the drive iteslf and a stacked pair of PCBs that form the controller. The interface to the host is QIC02, the interface between the drive and controller is QIC36 (or something very close to it). The QIC02 interface is pretty simple. 8 data lines and a handful of control/handshake lines (I think fewer than 8 of those). The control lines, from what I remmeber are all unidirecional (obviously some from drive to host, others from host to dive), the data lines are bidirectional (but all in the same direaction at any given time). I think the interface can be bit-banged. If not (i.e. there are some critical timings), then it's can be handled with a very little amount of logic. The PERQ QIC02 interface is a handful of TTL chips, I managed to fit it in the prototyping area of a OIO board I would be suprised if the QIC02 specificiation isn't avaiable somewhere... -tony