16 Aug
2014
16 Aug
'14
2:50 p.m.
Opening the rom cartridge is a little tricky it's holding together through four
rivets. You need to heat them before they can be removed, there is a big change you will
damage the housing.
But with some glue logic it should be possible to read the rom with a programmer. And I
know at least three 98228A ROM's, one in Australia one in the UK(London area) and one
in the Netherlands ;)
-Rik
-----Oorspronkelijk bericht-----
Van: "Brian L. Stuart" <blstuart at bellsouth.net>
Verzonden: ?16-?8-?2014 18:31
Aan: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at
classiccmp.org>
Onderwerp: Re: Disk for HP 9825B
I and others have been looking for a
98228A ROM for years, without luck.? If you do manage
to find one, please consider making it available to have the
contents of the ROM read out so we can build new ROM
modules!? I'd love to use my 9885M with my 9825T.?
What would be involved with imaging a module? I've
never cracked on open before, or is there a way to read
its contents from the 9825 itself?
BLS