6 Jan
2014
6 Jan
'14
8:15 a.m.
On Sat, Jan 4, 2014 at 3:24 PM, Pontus <pontus at update.uu.se> wrote:
... on my previous 11/23 it looks like this:
first at the RLV11: http://www.update.uu.se/~pontus/swec/rlv-flatkabel.jpg
Then the cab kit: http://www.update.uu.se/~pontus/swec/extern-flatkabel.jpg
And the external cable:
http://www.update.uu.se/~pontus/swec/extern-kontakt.jpg
I am unfamiliar with that cab kit. I don't recognize the small square holes.
The cab kit I have seen is with Unibus machines and is a small black
bracket, slightly smaller than your outstretched hand, that easily
mounts to a 19" rack rail, and accommodates two of those black plastic
ZIF transition bracket and has a threaded hole under each for the
round-cable strain relief. It would not be difficult to fabricate an
equivalent out of flat metal. There are probably mechanical drawings
of it in the RL11 printset... (checked... in MP00153_RL11EngrDrws.pdf
on Bitsavers, there's a picture of the overall arrangement, but no
detail on the bracket).
FWIW, the bracket appears to be P/N 70-12415, but that would probably
only help if you were looking through a bunch of sealed, marked padded
bags.
-ethan
