16 Nov
2003
16 Nov
'03
12:09 p.m.
----- Original Message -----
From: "Jay West" <jwest(a)classiccmp.org>
To: "Ed Sharpe" <esharpe(a)uswest.net>
Sent: Sunday, November 16, 2003 8:08 PM
Subject: Re: Grandfather system RTE6/VM?
to
You don't have to pop out the chips, just pull out
the rom card, A1 or A2,
I
think it's A2 going from memory. Look at the card
and see what numbers are
on the white and gold chips that are socketed :)
J
----- Original Message -----
From: "Ed Sharpe" <esharpe(a)uswest.net>
To: "General Discussion: On-Topic Posts Only" <cctech(a)classiccmp.org>
Cc: <jwest(a)classiccmp.org>
Sent: Sunday, November 16, 2003 5:31 PM
Subject: Re: Grandfather system RTE6/VM?
> well I have the set that is in the 2100 in the 2000 access system
here.
not a loose
set. ( shall we call it embedded?)
I would live in fear of poping them out though......
ed!
----- Original Message -----
From: "Jay West" <jwest(a)classiccmp.org>
To: "ed sharpe" <esharpe(a)uswest.net>et>; "General Discussion: On-Topic
and
Off-Topic Posts" <cctalk(a)classiccmp.org>
Sent: Sunday, November 16, 2003 12:07 PM
Subject: Re: Grandfather system RTE6/VM?
> You're quite sure you have a set of the IOP firmware for the 2100 cpus
Ed?
> > If so, good to know. I really want to get mine backed up as they seem > be
> > the only ones around. However, I got a new prom burner and it is
acting
very
> flaky so I'm a little afraid to put my chips in it.
>
> Jay
> ----- Original Message -----
> From: "ed sharpe" <esharpe(a)uswest.net>
> To: "General Discussion: On-Topic and Off-Topic Posts"
> <cctalk(a)classiccmp.org>rg>; <classiccmp(a)classiccmp.org>
> Sent: Saturday, November 15, 2003 11:16 PM
> Subject: Re: Grandfather system RTE6/VM?
>
>
> > we have a set too Al, but alas no way to read them....
> > It is up to you Jay!
> > ed!
> > ----- Original Message -----
> > From: "Al Kossow" <aek(a)spies.com>
> > To: <classiccmp(a)classiccmp.org>
> > Sent: Saturday, November 15, 2003 5:54 PM
> > Subject: Re: Grandfather system RTE6/VM?
> >
> >
> > >
> > > > I'll try to dump the microcode proms this weekend
> > >
> > > Dumps of the firmware is now up at
www.bitsavers.org/HP/1000_firmware
> > > including the IOP firmware the
21MX.
> > >
> > > Jay, since you appear to have the only surviving copy of the 2100
IOP
> firmware, it would be good to get the proms
read.
>
>
>