Intellec Series II Microcomputer Development System

Well, I finally got to check out the Intel Development System (ISIS?) I got from Las Vegas. On first glance it looks like it had been exposed to the elements. All of the documentation was warped, had water stains, and most of the reference cards were stuck together. I was able to separate most of them without totally damaging the covers, so most of the information on them is still in tact, but some are just plum stuck. What was the method for separating water damaged pages again? Run it through a steamer at a certain humidity or something? Anyway, the main computer unit itself looks OK on the outside, but I couldn't pull any of the multi-bus cards out. They seemed extremely stuck. Its official model number is MDX 225A. The main unit incorporates the CRT, an 8-inch drive mouted vertically next to the CRT, and a 6-slot card cage mounted horizontally underneath the CRT. It has an external keyboard. I also got an MDX 761A1 hard drive sub-system which looks like it will need extensive restoration as it shows most evidence of exposure to moisture. I don't know if it will ever work again or if I'll ever get any data off the 8-inch hard drive but I'll eventually find out. Also included was a Universal Programmer (model IUP 201) with modules for just about every Intel microcontroller and EPROM and whatnot of the day. It was in fine shape. I also received a large grocery bag filled with 8-inch floppies with the system software circa 1981-82. Overall a nice system but it will require some moderate restoration. Sam Alternate e-mail: dastar(a)siconic.com ------------------------------------------------------------------------------- Ever onward. September 26 & 27...Vintage Computer Festival 2 See http://www.siconic.com/vcf for details! [Last web page update: 06/11/98]