14 Oct
2008
14 Oct
'08
2:35 p.m.
J Blaser wrote:
I doubt it would hurt any future use of the cable to
pull/break the
pin on your monitor cable, but if you want to keep that side of
things stock, you could use a 1/32" bit and drill out the position on
the motherboard's connector, to allow the pin to pass through the
plastic.
Well a 386 may not count as vintage yet (or ever ...) but isn't it more
in keeping with the spirit of what we do here to hack, twist and bend
the modern to fit in with the old, where possible? Shouldn't the OP pull
a pin on a common or garden cable rather than drill a mobo connector?
Antonio