TD Systems TDL-11 QBUS (SCSI?) card

On Sun, May 3, 2015 at 1:49 PM, Seth Morabito <lists at loomcom.com> wrote: "KDF11-J" what's that? Do you mean M8189 KDF11-B 11/23-PLUS? If so, do you have the 23-380E4 & 23-381E4 (KDF11B-BH) or 23-453E4 & 23-454E4 (KDF11B-BJ) firmware with the MAP command? If you do then you should be able to use that to scan the I/O space to see where the TDL-11 CSR is located. The default should be 17774400. If it does not appear to be located there but you can identify where it is located maybe you can figure out how the dip switches map to the CSR address bits and relocate it to the standard address. On the TDL-12 you would use ODT to write 1000-octal to the CSR base register and then begin execution at 1000-octal after the controller DMA'd the host side DMON communication code there. After disassembling the TDL-11 firmware it appears that you might need to write 400-octal to the CSR base register instead of 1000-octal to get the controller to DMA the DMON communication code to 1000-octal. If that works and the code is DMA'd to 1000-octal and you start execution there it should result in this menu display on the console: "IAX 3.2 (C)1984 TD Systems\r\n" " B Boot\r\n" " C Configuration\r\n" " D Display\r\n" " E Exercise\r\n" " F Format\r\n" " S SCSI Cmd\r\n" " T Test TDL\r\n" " W Write BSF" Followed by a "DMON= " prompt where you would enter one of the above choices. -Glen