Linux PCB CAD software?

From: "Bruce Ray" <bkr at WildHareComputers.com> Reply-To: "General Discussion: On-Topic and Off-Topic Posts"<cctalk at classiccmp.org> To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org> Subject: Re: Linux PCB CAD software? Date: Fri, 29 Jun 2007 11:03:45 -0600 Before leaving the RX01 topic, note that Chuck's design was implemented using the Cadsoft Eagle years ago and is available at: http://www.wildharecomputers.com/download/rx0x/rx01-b.zip A minor update is at: http://www.wildharecomputers.com/download/rx0x/rx01-d.zip The idea of putting an SX-28 processor in control of the communications and using a native USB interface resulted in the (untested) derivative design at: http://www.wildharecomputers.com/download/rx0x/rx-usb.zip and notes and general comments for these designs are at: http://www.wildharecomputers.com/download/rx0x/notes.txt And I would seriously consider Diptrace (www.diptrace.com) if I had to look at CAD software today, especially compared to Eagle's interface. Okay, I focus on Data General Novas, Eclipses and MVs, but I teethed on PDP-8s before 1969... ;-) Bruce Bruce Ray Wild Hare Computer Systems, Inc. bkr at WildHareComputers.com ...preserving the Data General legacy: www.NovasAreForever.com ----- Original Message ----- From: "Dave McGuire" <mcguire at neurotica.com> To: "General Discussion: On-Topic Posts Only" <cctech at classiccmp.org> Sent: Friday, June 29, 2007 12:33 AM Subject: Re: Linux PCB CAD software?