I rarely top post, but this seems like a reasonable situation.
I finally had a few minutes to look at a few of the 40 * RX50 disk
images under RT-11.
Most of the time was to look at the CACHE.DSK image which holds a set of
files
that I have never seen before. Based on the contents, it may take some
time to sort
out exactly what is needed, but this set certainly looks extremely
promising.
It is highly probable that at least a few of the other RX50 images hold
other gems as well.
If you have any other RX50 floppy media which you are going to make
available, please
let us know.
I have sort of placed RT-11 into a lower priority than a few years ago,
but something
like this may rekindle my interest.
Thank you very much and keep up the great effort.
Sincerely yours,
Jerome Fine
Thanks for the advice. I had already started by the
time I ready your
reply so I have images for now, although it would be easy to go the
extra step by mounting my images and extracting the individual files. I
might have a hunt to see if there are any linux/unix utilities out there
so I can automate exracting the individual files from RT-11 images.
If anyone is interested, the fruits of my labours can be seen here:
http://www.pdp11.co.uk/2009/05/17/rt-11-rx50-disk-images/
Quite a few of the files probably already exist in other archives but
some of the stuff is probably new. I've not had a chance yet to look
through the disks in detail but will annotate up the contents when I get
a chance.
I've just been given a set of microRSX 1.0 distribution RX50s so I will
put those up next.
Thanks,
Toby
On Sat, 2009-05-16 at 17:38 -0700, Lyle Bickley wrote:
>Toby,
>
>On Saturday 16 May 2009, Tobias Russell wrote:
>
>
>>I have a large box of RX50 disks that I would like to archive onto
>>modern media to ensure they are preserved. I've built up a machine with
>>a 5.25" floppy drive and install DOS and PUTR.
>>
>>Is the best method to archive them to:
>>
>>MOUNT B: /FOREIGN /RX50
>>
>>followed by:
>>
>>COPY/DEV/FILE B: [filename]
>>
>>for each of the disks I insert?
>>
>>I was pondering whether I should use the /BINARY flag on the copy, but
>>I've not seen this mentioned on other webpages I have read.
>>
>>
>Since PUTR "understands" multiple filetypes, I have found it is much better
to
>save the contents of each floppy (RX50) to a separate directory - but NOT as an
>image file, but rather as individual files. That way you can later use PUTR to
>create logical media of any form - say RL02, RX01, etc. from the captured
>files.
>
>Assuming drive "B:" is your 5.25" drive, and the OS is RT11 you would
do the
>following:
>
>MOUNT B: /RT11 /RX50
>then
>COPY B:*.* .
>and you will have captured the individual files that were on the RX50.
>
>When you reverse the process to recreate a diskette (RX50, RX23, RX01, etc.) be
>sure to use a SET B: type; i.e., SET B: RX23
>then
>FORMAT B: /RT11 /RX23 (or whatever)
>then
>COPY *.* B:
>
>NOTE: Be absolutely sure to SET COPY BINARY before you do anything. For some
>unknown reason, the PUTR default is ASCII. (I have a SET COPY BINARY in PUTR's
>initialization file - to be sure I never forget to do it ;-)
>