4 Aug
2016
4 Aug
'16
12:26 a.m.
link to area? or topic? Please?
In a message dated 8/4/2016 12:00:45 A.M. US Mountain Standard Time,
dave.g4ugm at gmail.com writes:
There was some discussion on this on the VCFED forums. Might be worth a
read.
Dave
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Richard
Cini
Sent: 03 August 2016 11:51
To: General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org>
Subject: Re: RX02 rx-01 heathkit 8 inch drive for H-11 ( lsi11 heath
case
drive
diff?)
Are you referring to having the H-27 drive from Heath? I don't know for
sure
because I've never seen H27 docs, but the disk
capacity is the same as
the
RX01 (256k) and I think the interface was made
deliberately incompatible,
likely at the behest of DEC. The version of RT-11 (called HT-11)
supposedly
used a different floppy device driver.
Again, this is based solely on what I've read from various places and not
direct experience (I have an H-11 with a SCSI controller; no floppy; and
it runs
RT-11 no problem).
Rich
Sent from my iPhone
> On Aug 3, 2016, at 1:40 AM, COURYHOUSE at aol.com wrote:
>
> we have a heath h11 which is lsi 11 aka pdp 11/03
>
> the drives are not rx o1 or rx o2... but are they and the
> controller comparable? with rx01 or an rx02?
>
> Thanks Ed# at smecc