23 Feb
2013
23 Feb
'13
4:19 a.m.
On Fri, 22 Feb 2013 16:19:10 -0500
"J. Alexander Jacocks" <jjacocks at gmail.com> wrote:
1) I have the HIL-PS/2 adapter (HP calls is the
"keyboard adapter
module"), but it doesn't plug in to the HIL port on the machine. There
is a descending piece of plastic on the right side of the 10P10C
connector that blocks it. I know that this adapter was made for the
9000/700 PA-RISC workstations, will it work with the 375, if I remove
that tab?
No. No way. That litle box from the 715 machines is just a break out
box. It breaks out the different pins of the 10P10C connector to the
PS/2 keyboard / mouse and the HIL connector. There is no PS/2 => HIL
protocol converter in it. It is not a HIL device.
--
\end{Jochen}
\ref{http://www.unixag-kl.fh-kl.de/~jkunz/}