Mac Net dummy Q's

No need to reboot after starting File Sharing, and in fact, rebooting can cause the file sharing to be turned back off. So first step, go back into the Sharing Setup control panel, and make sure the Start button says "Stop" (if it says "Start" then click it again, and wait for file sharing to startup, the button will change to Stop when it is up and running) In the remote computer's Chooser, under AppleShare. If you don't see the server there, make sure both computers' AppleTalk control panel is set to use the Printer Port, and that AppleTalk is turned on (and make sure the serial TeleNet connectors are plugged into the Printer port and not the Modem port). Also, on the TeleNet connectors, make sure there is a terminator in the unused phone jack on each. I don't remember if the ones I gave you have termination switches on the side, if they do, just make sure it is set to ON (if it is, then you don't need a terminator in the 2nd jack... I know either they have they switches or I gave you terminators... I don't think I would have been brain dead enough to give you them without a way to terminate them) -chris <http://www.mythtech.net>