4 Nov
2004
4 Nov
'04
1:39 a.m.
At 09:37 AM 11/4/04 -0500, you wrote:
The transputer CPU was made by INMOS (which was later
bought out by
SGS-Thompson which became ST-Microelectronics). However, there were several
manufacturers of transputer equipment. Some of the popular ones are INMOS,
Transtech, Niche, Parsytec, Sundance, and Parsys. See the specs page for a
list of vendors. This is not complete at all and only contains vendors I
have info on. What type of INMOS stuff do you have???
I have some very high speed memory (at least for it's day!) And IIRC I
have a couple huge boards full of GAPP processors. IIRC there are two
boards about 24" square and there's several thousand GAPP procesors on them.
Joe
Thanks,
Ram
-----Original Message-----
From: Joe R. [mailto:rigdonj@cfl.rr.com]
Sent: Thursday, November 04, 2004 9:11 AM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: RE: Surviving UK Transputer systems...
At 08:17 AM 11/4/04 -0500, Ram wrote:
A transputer is just like any other processor with
memory, etc, etc.
Except that it has two unique attributes:
1) Has communication links so that you can hook it up to other
transputer nodes (or other peripherals). This allowed you to create a
multiprocessor system with several nodes (seen transputer networks of
1024 nodes at one time). It was like LEGO for parallel processing.
The technology that was designed for the transputer is now slowing
creaping into modern processors. Not bad for a mid 80's processor....
2) Has micro-coded scheduler which allows you to create multi-processes
inside a single CPU. It supported two priorities in high and low. You
could do parallel processing in assembly with this baby! This is all
embedded inside the CPU core. Designed around the mid 80's and had an
EOL
(End-of-life) around the late 90's. Quite a remarkable CPU and it was
quite
fast too compared to the 386 of that era. See my
website at
http://www.classiccmp.org/transputer for more info/links...
I looked at the data sheets on your website so that I would know that the
parts and part numbers looked like. Does anyone other that INMOS and
Thompson make these? I find lots of parallel computing equipment so there
should be some transputer stuff in there too. I have found a lot of high
speed parallel stuff with INMOS parts but I think it's older (early 80s)
than the transputers. But the transputer stuff should show up one day.
Joe
(c) 2004 OpenLink Financial
Copyright in this message and any attachments remains with us. It is
confidential and may be legally privileged. If this message is not
intended for you it must not be read, copied or used by you or
disclosed to anyone else. Please advise the sender immediately if
you have received this message in error.
Although this message and any attachments are believed to be free of
any virus or other defect that might affect any computer system into
which it is received and opened, it is the responsibility of the
recipient to ensure that it is virus free and no responsibility
is accepted by Open Link Financial, Inc. for any loss or damage in any
way arising from its use.